在这些行业团体面前代表通宝tb222下载的成员
EASA staff and volunteer committee members represent your interests on a variety of standards-making committees that affect our industry. 下面是拥有EASA代表的组织列表.
美国声学学会
Gene Vogel, EASA泵 & 振动专家
- ASA ASC-S2 Work Group 15 - Shaft Alignment Methodology (acting chair)
加拿大标准协会(CSA)
汤姆主教,P.E.， EASA高级技术支持专家
- CSA 392电机翻新小组委员会, Testing of three-phase cage induction motors during refurbishment
国际电工委员会(IEC)
John Allen, Sheppard工程有限公司
- Working Group for Introduction of IEC 60079-19 into IEC Ex Scheme
- IEC 60079-19的TC31管理委员会
汤姆主教,P.E.， EASA高级技术支持专家
- Maintenance Team 60079-1 for IEC 60079-1, Electrical Apparatus for Explosive Gas Atmospheres
- 用于IEC 60079, 61779, 62013和62086的TC31美国标签
荣楚克，EASA高级技术支持专家
- TC2工作组
- IEC 60034-8 Rotating Electrical Machines; Terminal Markings
- 旋转电机。热保护
- 由变频器供电的电机
- IEC 60035-2-34 Standards Technical Panel for Hermetic Refrigerant Motor-Compressors
- IEC 60034-27 Rotating electrical machines – Part 27: Partial discharge off-line measurements on the stator winding insulation of rotating machinery
电气和电子工程师学会
Mike Howell, EASA技术支持专家
- IEEE 1415感应电机维修测试指南
- IEEE Standard 11-2006, Rotating Electric Machinery for Rail and Road Vehicles
荣楚克，EASA高级技术支持专家
- IEEE 115同步电机测试程序
- IEEE 303 Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, 2区和2区位置和II类, 第2分部和第22区地点
- IEEE 841-1(北美) & 841-2 (International) Standard for the Petroleum and Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled (TEFC) Electric Motors
- IEEE 1017-2013 Recommended Practice for Field Testing Electrical Submersible Cable
- IEEE 1018 Recommended Practice for Specifying Electric Submersible Pump Cable - Ethylene Propylene Rubber Insulation
- IEEE 1019 Recommended Practice for Specifying Electric Submersible Pump Cable - Polypropylene Insulation
- IEEE 1068 Standard for the Repair and Rewinding of Electric Motors for the Petrochemical and Other Process Industries (chair)
- IEEE 1349危险位置的电机
- IEEE 1415 Guide for Induction Machinery Maintenance Testing (Note: Voted to allow this controversial guide to expire)
- IEEE 1458推荐的选择实践, Field Testing and Life Expectancy of Molded Case Circuit Breakers for Industrial 应用程序s
- IEEE 1566 Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
- 执行电弧闪光危害计算的IEEE 1584指南
- IEEE 1683 Guide for Motor Control Centers Rated Up to and Including 600v AC or 1000v DC with Recommendations Intended to Help Reduce Electrical Hazards
- IEEE 1716 Recommended Practice for Managing Natural Disaster Impact of Key Electrical Systems and Installations in Petroleum and Chemical Facilities
- IEEE 1814 Recommended Practice for Electrical System Design Techniques to Improve Electrical Safety
- 直流电机(椅子)维修指南
IEEE标准协会-标准审查和投票
- IEEE C57.12.00 Standard for the General Requirements for Liquid-Immersed Distribution, 权力, 和调节变压器
- IEEE C57.12.垫装的标准要求, 区划的类型, 自冷却的, 三相配电变压器, 10 MVA and Smaller; High Voltage, 34.5 kV Nominal System Voltage and Below; Low Voltage, 15 kV Nominal System Voltage and Below
- IEEE C57.12.59 Guide for Dry-Type Transformer Through-Fault Current Duration
- IEEE C57.12.90 Standard Test Code for Liquid-Immersed Distribution, 权力, 和调节变压器
- IEEE C57.94安装建议, 应用程序, 操作, and Maintenance of Dry-Type Distribution and 权力 Transformers
- IEEE C57.106 Guide for Acceptance and Maintenance of Insulating Oil in Equipment
- IEEE C57.637 Guide for the Reclamation of Mineral Insulating Oil and Criteria for Its Use
- IEEE 56 Guide for Insulation Maintenance of Electric Machines (Combines IEEE 56 and IEEE 432)
- IEEE 95 Recommended Practice for Insulation Testing of AC Electric Machinery with High Direct Voltage
- IEEE 112 Test Procedure for Polyphase Induction Motors and Generators
- IEEE 117 Standard Test Procedure for Thermal Evaluation of Systems of Insulating Materials for Random-Wound AC Electric Machinery
- IEEE 1068 Standard for the Repair and Rewinding of Electric Motors for the Petrochemical and Other Process Industries
- IEEE 3002.7 Recommended Practice for Conducting Motor-Starting Studies in Industrial and Commercial 权力 Systems
- IEEE 3002.8 Recommended Practice for Conducting Harmonic-Analysis Studies of Industrial and Commercial 权力 Systems
- IEEE PPIC DCS小组委员会(驱动器 & 控制系统)
全国电器制造商协会(NEMA)
荣楚克，EASA高级技术支持专家
- ANSI C50 Rotating Machinery Committee (Alternate: 汤姆主教,P.E.， EASA高级技术支持专员)
- NEMA 1000兆瓦
汤姆主教,P.E.， EASA高级技术支持专家
- NEMA规范和标准(C&S)翻新产品特别工作组
美国保险商实验室(UL)
汤姆主教,P.E.， EASA高级技术支持专家
- 506低压变压器
- 1004电动机标准(7个子类)
- 1446绝缘材料系统
- 变压器，配电，干式600伏特以上
- 2111电动机过热保护标准
荣楚克，EASA高级技术支持专家
- 448消防用泵标准
- 危险场所用电动机和发电机
- 778电动水泵标准
- 840 Standard for Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment
- 1434热敏电阻型器件标准
- 1450 Standard for Motor-Operated Air Compressors, Vacuum Pumps and Painting Equipment